Intertek is the leading provider of immunity and susceptibility testing. We offer the world’s largest network of Electromagnetic Compatibility (EMC) facilities to test products quickly and expertly.
While most global markets require proof of EMC emissions compliance, currently, the European Union is the only major market that also requires proof of immunity (EMI). Products destined for the European market must comply with EN and IEC standards that specify EMC Immunity performance.
Electrostatic Discharge
+/- 15 kV Contact Discharge, +/- 30 kV Air Discharge
Humidity Temperature controlled rooms and lab
Waveform verification target with 1 GHz Oscilloscope
Various ESD tips from standard IEC/EN test to tips designed for automotive
Bulk Current Injection (BCI)
Use of dual directional power meter and probes for Forward, Reverse and Net power measurements for every test
Fixtures specifically designed per standards to improve repeatability.
Specific equipment per standard used for testing to ensure proper testing and repeatability
Can perform testing to Ford, GM, Chrysler, Fiat, Nissan, Honda, Mazda, Audi, ISO and other BCI standards
Radiated Electromagnetic Fields (RF)
Uniform field per IEC/EN specification
Varity of modulations (AM, FM, Pulsed)
Field strengths designed for >200 V/m at a distance of 1m CW or pulsed from 1-18GHz
Calibrated fields available up to 18 GHz
1kW amplifier from 80 MHz- 1 GHz
250W amplifiers from 1 GHz - 18 GHz
500W amplifier from 10 kHz - 200 MHz
5M EMC Chamber- Capabilities from 26 MHz to 18GHz. Can be used for testing in accordance to: SAE, ISO, GM, Ford, Chrysler, Nissan, Audi, Fiat, Honda, Mazda, SAE J1113, SAE J551
Typical industry standards include Automotive, GM 5097, 3100, DC 10614REV A, Ford AB/AC, Nissan, Mazda, Fiat, Honda, Audi, Chrysler, SAE, ISO, Mazda
Peripheral support utilities are available: Compressed air (125 PSI @ 30 CFM, oiled or purified @ 2 Microns), Water (to 100 PSI), External gas venting (200 CFM), AC Power up to 240 VAC @ 50 Amps (50 or 60 Hz) single or three phase, DC Power up to 65 VDC @ 150 Amps. Full color internal monitoring system, with multiple camera angles provided. Generators, Chillers, Power Loads, Inert Gases, EMC hardened computers, can be made available
EUT (equipment under test) can be either tabletop or floor standing equipment.
Scope
EN Standard
IEC Standards
Burst/Electrical Fast Transient
EN 61000-4-4
IEC 801-4; IEC 61000-4-4
Conducted Continuous Disturbances from DC to 150 kHz
EN 61000-4-16
IEC 61000-4-16
Conducted Disturbances Induced by RF Fields
EN 61000-4-6
IEC 61000-4-6
Electrostatic Discharge
EN 61000-4-2
IEC 61000-4-2
Generic Immunity - Industrial Environment
EN 61000-6-2
IEC 61000-6-2
Generic Immunity - Residential, Commercial & Light Industry
EN 61000-6-1
IEC 61000-6-1
Magnetic Field, Damped Oscillatory
EN 61000-4-10
IEC 61000-4-10
Magnetic Field, Oscillatory
EN 61000-4-12
IEC 61000-4-12
Magnetic Field, Power Frequency
EN 61000-4-8
IEC 61000-4-8
Magnetic Field, Pulse
EN 61000-4-9
IEC 61000-4-9
Radiated RF Electromagnetic Field
EN 61000-4-3
IEC 61000-4-3
Surge
EN 61000-4-5
EN 61000-4-5
Voltage Dips, Short Interruptions and Voltage Variations